April 2, 2014 § Leave a comment
Plot Our heroes set out for the first battle. Session Restore’s file I/O was clearly inefficient. Not only was it performing redundant operations, but also it was blocking the main thread doing so. The time had come to take it back. Little did our heroes know that the forces of Regression were lurking and that real battle would be fought long after the I/O had been rewritten and made non-blocking.
For historical reasons, some of Session Restore’s File I/O was quite inefficient. Reading and backing up were performed purely on the main thread, which could cause multi-second pauses in extreme cases, and 100ms+ pauses in common cases. Writing was done mostly off the main thread, but the underlying library used caused accidental main thread I/O, with the same effect, and disk flushing. Disk flushing is extremely inefficient on most operating systems and can quickly bring the whole system to its knees, so needs to be avoided.
In addition to performing main thread I/O and flushing, Session Restore’s I/O had several immediate weaknesses. One of the weaknesses was due to its crash detection mechanism, that required Session Restore to rewrite sessionstore.js immediately after startup, just to store a boolean indicating that we had not crashed. Recall that the largest sessionsstore.js known to this date weighs 150+Mb, and that 1Mb+ instances represented ~5% of our users. Rewriting all this data (and blocking startup while doing so) for a simple boolean flag was clearly unacceptable. We fixed this issue by separating the crash detection mechanism into its own module and ensuring that it only needed to write a few bytes. Another weakness was due to the backup code, which required a full (and inefficient) copy during startup, whereas a simple renaming would have been sufficient.
Having fixed all of this, we were happy. We were wrong.
Sadly, Telemetry archives do not reach back far enough to let me provide data confirming any speed improvement. Note for future perf developers including future self: backup your this data or blog immediately before The Cloud eats it.
As for measuring the effects of a flush, at the moment, we do not have a good way to do this, as the main impact is not on the process itself but on the whole system. The best we can do is measure the total number of flushes, but that doesn’t really help.
Full speed… backwards?
The first indication that something was wrong was a large increase in Telemetry measure SESSIONRESTORED, which measures the total amount of time between the launch of the browser and the moment Session Restore has completed initialization. After a short period of bafflement, we concluded that this increase was normal and was due to a change of initialization order – indeed, since OS.File I/O was executed off the main thread, the results of reading the sessionstore.js file could only be received once the main thread was idle and could receive messages from other threads. While this interpretation was partly correct, it masked a very real problem that we only detected much later. Additionally, during our refactorings, we changed the instant at which Session Restore initialization was executed, which muddled the waters even further.
The second indication arrived much later, when the Metrics team extracted Firefox Health Report data from released versions and got in touch with the Performance team to inform us of a large regression in firstPaint-to-sessionRestored time. For most of our users, Firefox was now taking more than 500ms more to load, which was very bad.
After some time spent understanding the data, attempting to reproduce the measure and bisecting to find out at which changeset the regression had taken place, as well as instrumenting code with additional performance probes, we finally concluded that the problem was due to our use I/O thread, the “SessionWorker”. More precisely, this thread was very slow to launch during startup. Digging deeper, we concluded that the problem was not in the code of the SessionWorker itself, but that the loading of the underlying thread was simply too slow. More precisely, loading was fine on a first run, but on second run, disk I/O contention between the resources required by the worker (the cache for the source code of SessionWorker and its dependencies) and the resources required by the rest of the browser (other source code, but also icons, translation files, etc) slowed down things considerably. Replacing the SessionWorker by a raw use of OS.File would not have improved the situation – ironically, just as the SessionWorker, our fast I/O library was loading slowly because of slow file I/O. Further measurements indicated that this slow loading could take up to 6 seconds in extreme cases, with an average of 340ms.
The patch using the new version of OS.File.read() has landed a few days ago. We are still in the process of trying to make sense of Telemetry numbers. While Telemetry indicates that the total time to read and decode the file has considerably increased, the total time between the start of the read and the time we finish startup seems to have decreased nicely by .5 seconds (75th percentile) to 4 seconds (95th percentile). We suspect that we are confronted to yet another case in which concurrency makes performance measurement more difficult.
We have not attempted to measure the duration of shutdown-time I/O at the moment.
Losing data or privacy
While we received no reports of bugs caused by this risk, we solved the issue by plugging Session Restore’s shutdown into AsyncShutdown.
Changing the back-end
One of our initial intuitions when starting with this work was that the back-end format used to store session data (large JSON file) was inefficient and needed to be changed. Before doing so, however, we instrumented the relevant code carefully. As it turns out, we could indeed gain some performance by improving the back-end format, but this would be a relatively small win in comparison with everything else that we have done.
We have several possible designs for a new back-end, but we have decided not to proceed for the time being, as there are still larger gains to be obtained with simpler changes. More on this in future blog entries.
Before setting out on this quest, we were already aware that performance refactorings were often more complex than they appeared. Our various misadventures have confirmed it. I strongly believe that, by changing I/O, we have improved the performance of Session Restore in many ways. Unfortunately, I cannot prove that we have improved runtime (because old data has disappeared), and we are still not certain that we have not regressed start-up.
If there are lessons to be learned, it is that:
- there is no performance work without performance measurements;
- once your code is sophisticated enough, measuring and understanding the results is much harder than improving performance.
On the upside, all this work has succeeded at:
- improving our performance measurements of many points of Session Restore;
- finding out weaknesses of ChromeWorkers and fixing some of these;
- finding out weaknesses of OS.File and fixing some of these;
- fixing Session Restore’s backup code that consumed resources and didn’t really do much useful;
- avoiding unnecessary performance refactorings where they would not have helped.
The work on improving Session Restore file I/O is still ongoing. For one thing, we are still waiting for confirmation that our latest round of optimizations does not cause unwanted regressions. Also, we are currently working on Talos benchmarks and Telemetry measurements to let us catch such regressions earlier.
This work has also spawned other works for other teams on improving the performance of ChromeWorkers’ startup and communication speed.
In the next episode
Drama. Explosions. Asynchronicity. Electrolysis. And more.